Now you can have your Raspberry Pi...and industrial I/O, too!

Sense and switch industrial-level loads with your Raspberry Pi®.

Raspberry Pi logoWith Opto 22's Digital I/O System for Raspberry Pi, you can switch real-world electrical loads like industrial motors and pumps, and sense circuits and status through industrial-grade sensors, with your Raspberry Pi's GPIO. 

Use your favorite Pi-supported programming language like Python, C, and more. Or, use Node-RED to quickly read and write I/O with these Pi build instructions.

For more information, including details about selecting your own racks and I/O modules, see our Selection Guide for Industrial Digital I/O for Raspberry Pi.

 

Get a Starter Kit

Get a complete starter kit with everything you need to get started with digital I/O for your Raspberry Pi. All you need is your Raspberry Pi (Pi 1 Models A+ or B+, Pi 2 Model B, Pi 3 Model B, or Pi Zero) and a 5V 2A power supply.

Here's what you get:

  • Digital I/O Carrier Board for Raspberry Pi 
  • 8-position I/O mounting rack
  • 4 I/O modules (1 DC in, 1 DC out, 1 AC in, 1 AC out)
  • Mounting accessories and ribbon cable

Get the Quick Start Guide for the Digital I/O for Raspberry Pi starter kit.

ORDER TODAY!

Starter Kit in the box

Offer Details

The Digital Industrial I/O for Raspberry Starter Kit includes the following (over $215 value):

  • OPTO-P1-40P - Digital I/O Carrier Board for Raspberry Pi, including Pi mounting hardware
  • G4PB8HG4 8-channel Mounting Rack with Header Connector
  • G4IDC5MAG4 DC Input 10-32 VDC, 5 VDC Logic with Manual/Auto Switch
  • G4OAC5G4 AC Output 12-140 VAC, 5 VDC Logic
  • G4IAC5G4 AC Input 90-140 VAC/VDC, 5 VDC Logic
  • G4ODC5G4 DC Output 5-60 VDC, 5 VDC Logic

The Starter Kit is compatible with any model Raspberry Pi that offers the 40-pin GPIO header connector, including Raspberry Pi 1 Models A+ and B+, Pi 2 Model B, Pi 3 Model B, and Pi Zero.

The Starter Kit gives you room to expand. Add up to 4 more G4 I/O modules from the extensive list of compatible G4 inputs and outputs.

 

ORDER TODAY!

When assembled with your Raspberry Pi and power supply, your Starter Kit will look like this:

Assembled-raspberry-pi-digital-io-starter-kit-with-power.jpg

For more information, including details about selecting your own racks and I/O modules, see our Selection Guide for Industrial Digital I/O for Raspberry Pi page.

Raspberry Pi is a trademark of the Raspberry Pi Foundation.