OPTO-P1-STARTERKIT-1
Hover over image to zoom in

OPTO-P1-STARTERKIT-1

Availability: Obsolete
OBSOLETE Digital I/O for Raspberry Pi Starter Kit (AC/DC)

Production Specification

*** NOTE: This part is OBSOLETE and no longer available. ***

Use your Raspberry Pi in the real world! The Digital I/O for Raspberry Pi Starter Kit gets you started sensing and switching industrial-level electrical loads with your own Raspberry Pi. Now you can monitor and control real-world devices like industrial motors, pumps, and sensors.

The system uses the same field-tested, reliable Opto 22 G4 input/output (I/O) modules that have served automation applications worldwide for nearly 40 years. Just bring your Pi and its power supply, and you’re ready to begin.

The Starter Kit includes all of the following:
  • OPTO-P1-40P Digital I/O Carrier Board, including interface cable, Pi board mounting standoffs, and spare fuse for mounting rack
  • G4PB8H 8-module mounting rack
  • G4IAC5 90-140 VAC/VDC input module
  • G4IDC5MA 10-32 VDC input module with manual/auto switch
  • G4OAC5 12-140 VAC output module
  • G4ODC5 5-60 VDC output module
The Starter Kit works with any model Pi with a 40-pin header connector, including Models A+ and B+, Pi 2 Model B, Pi 3 Model B, Pi 4 Model B, and Pi Zero. The Starter Kit also gives you room to expand. Add up to 4 more G4 I/O modules from the extensive list of compatible G4 inputs and outputs.
*** NOTE: This part is OBSOLETE and no longer available. ***
 

Digital I/O for Raspberry Pi Starter Kit Data Sheet

*** NOTE: This part is OBSOLETE and no longer available. ***
The           Digital I/O for Raspberry Pi Starter Kit gets you started sensing and switching industrial loads with your own Raspberry Pi. This data sheet describes the kit and includes step-by-step instructions for using it.

Digital I/O for Raspberry Pi Selection Guide

Now you can safely and reliably sense and switch industrial-level electrical loads with your Raspberry Pi® and Opto 22 industrially hardened digital I/O.

This Selection Guide describes compatible I/O racks and modules, power supplies, and accessories that work with the Raspberry Pi and the Digital I/O Carrier Board for the Pi (OPTO-P1-40P). Specifications, dimensional drawings, and wiring diagrams for racks and I/O modules are included.

For code samples and steps to get started, also see developer.opto22.com.

Build a Raspberry Pi with Node-RED and Industrial I/O

The Raspberry Pi® is a tiny, powerful, inexpensive computer, capable of many tasks. Couple the Pi to industrial, solid-state Opto 22 digital inputs and outputs, and you can build cost-effective solutions for commercial and industrial applications.

This technical note (also a blog post on our website), shows you step-by-step how to set up your Pi to use the free, open-source software tool Node-RED with industrial I/O.

CAD 3D Drawing: OPTO-P1-40P Digital I/O Carrier Board for Raspberry Pi

This CAD file contains a three-dimensional drawing of the OPTO-P1-40P digital I/O carrier board for Raspberry Pi. The drawing applies to the following part numbers:

No videos or demos are available for this product.