SNAP Mechanical Power Relay Output Module

SNAP-OMR6T-CSwitch loads up to 250 VAC, 6 A

This SNAP mechanical power relay output module can switch loads up to 6 amps at 250 VAC or 30 VDC.

The SNAP-OMR6T-C is SPDT (Form C): each of the four mechanical contacts can be used as normally open or normally closed. Your choice.

Features:

  • Four channels per module, each switching AC or DC power
  • Channel-to-channel isolation and optical isolation
  • Integrated transient suppression while maintaining minimal leakage current
  • Each channel can carry 6 amps, and there's no reduction in power when multiple channels are on.

Mount the mechanical power relay module on a SNAP PAC rack alongside other analog, digital, and serial I/O modules. Use a SNAP PAC brain or rack-mounted controller for communications and I/O processing.

Or you can use this module with legacy SNAP brains—SNAP Ultimate, SNAP Ethernet, SNAP Simple, B3000, B3000-B—and B-series or M-series racks.

Read the SNAP Mechanical Power Relay Output Module data sheet.